Need Help?
Call 800-749-2788
ES Series Electrical Splice Kits
Absolute Protection for Any Splice
In a Wet or Damp Environment
The ES Series kits are specifically designed for electrical applications. These kits are suitable for direct burial applications or equivalent by providing a permanent water tight seal. The Shake N'Seal® ES series kit protects your splice from moisture and voltage leaks to ground, and helps to eliminate cable deterioration, and other related problems that can lead to open circuits and cable failure. This kit replaces the sheath integrity with a permanent seal around the splice or damaged cable. It can be used for adding a length of wire to a run or building a branch splice. For best results, use any approved barrel type connector for through-splice applications and any approved wire nut for butt-splice configurations. Below are the four ES Series kits available:
| Part Number | Description |
| ES137S | Smaller version of ES200S. This kit is perfect for butt and branch splice applications up to 600 volt. Best if used with wire nut connectors |
| ES200S | Larger version of ES137S. |
| ES200SV | This kit is perfect for small, hard-to-splice areas. The clamshell-like outer closure just snaps into place over the splice. It's versatile, and can be used for either a butt, branch or through splice |
| ES1150 | This kit may be used with a range of cable sizes from 18- 4/0. It is recommended for single service conductors that utilize barrel type connectors in a through splice configuration up to 5 kv |
Click here to view a selector chart for these products
Click here to download a data sheet on these products
Click here to download an MSDS sheet on these products
Click here to view a flash video of how to put together a splice kit